Decorative Terrarium Backwalls.
The CeramicNature Terrarium thin back walls have a beautiful natural look. These are the ideal back walls for any terrarium. They have a base of polyester with a hard top layer of special and unique mineral resins. This top layer is rock hard and the wall is safe for animals, people and nature.
The Thin rear walls are colored manually using the airbrush technique. Because of this no back wall is identical. Each back wall is unique in itself.
The decorative CeramicNature rear wall terrarium thin brown are only 2-3cm deep (at the deepest point) and enhance with their special structure a perfect depth effect of the terrarium. The CeramicNature rear walls belong to the highest segment in the field of terrarium rear walls and are of a comparable quality to Back to Nature and RockZolid. The advantage of the CeramicNature back walls is that they are cheaper, thinner and easier to install. This is because the CeramicNature backwalls do not need to be treated with Epoxy, so they can be placed in the aquarium immediately upon receipt.
Machining the CeramicNature terrarium thin back walls is very easy with a grinder, Dremel or a saw. When sawing, it is important that the back wall lies flat on the front and that it is cut horizontally across the back. The easiest way to do this is with a Dremel or grinder.
Tip: Combine the CeramicNature back walls with the Rock, Stone, Root or other modules for an even more realistic effect.
CeramicNature's products are durable and have a colorfast coating of a very high quality. For this reason, they do not require a toxic epoxy coating to prevent discoloration.
Available sizes are:
50×30 1 piece
60×40 1 piece
100×50 1 piece
120×50 1 piece
120×60 1 piece
Watch all instructional videos on our Youtube channel via: CeramicNature Youtube channel
Check out the back walls here.
Available from more than 300 partners in Europe. See our partner page for a store near you.
